1. How to Make Tongue and Groove V-Groove Boards | Rockler Skill Builders
V-groove board is a decorative panel board similar to beadboard. It features chamfered edges that form a v-groove between each board. The v-groove creates a nice shadow line. You can purchase special router bit sets that will cut the tongue and groove joint and the v-groove in a single pass on each board, but you can also make these boards using more common router bits.
2. 📐 How to make a loose tongue and groove joint // woodworking basics
🎟️ Subscribe! goo.gl/Co1oRz
The loose-tongue and groove joint is great for building furniture. The joint is made by cutting a groove on the edge of two boards that are to be put together. Then to cut a single tongue to fit in to the the grooves when they are pressed together. The last part of the process is to glue all of the pieces together.
⚠️Warning: Woodworking can be potentially life threatening. Do not attempt any woodworking project without familiarizing yourself with important safety information regarding the tools and procedures you will use. This video makes no attempt at covering all required safety and procedural information to safely replicate this project. Independently verify information in this video before considering it as fact. Assume responsibility for your own safety and well being. I say this with love and concern for your well being.
📷 Instagram instagram.com/_natelarge/
#woodworking #tablesaw #diy #woodshop #workshop #howto #maker #powertools #woodworking joint #shopmade #makeit
3. Adjustable Tongue and Groove Router Bit - EXPLAINED
Showing how to configure the Freud Adjustable Tongue and Groove Router Bits.
The other Video, which I have mentioned:
Use different sized Spacers to set the Upper and Lower Cutters to the required width.
The adjustable range goes from 5.5mm to 9.5mm.
The available Spacer sizes are:
4x 1mm (0.039”)
1x 0.5mm (0.02”)
2x 0.2mm (0.008”)
2x 0.15mm (0.006”)
2x 0.1mm (0.004”)
The maximum groove width is 0.95mm.
“Do it right” by “Jingle Punks”
“Dutty” by “Vibe Tracks”
“Lucky Day” by “Jingle Punks”
4. How To Make Tongue And Groove Doors On The Table Saw - 171
Free plans: jayscustomcreations.com/?p=6998
Subscribe for new videos every week. I recently made new tongue and groove cabinet doors for a relatives kitchen. This is a video covering the process.
Subscribe to my VLOG channel: youtube.com/jccshorts
Here's how you can show your support:
Shirts - jayscustomcreations.com/shop
Contribute with the donate button on the bottom of my website - jayscustomcreations.com/
---------- Project plans: jayscustomcreations.com/plans/
Tools in my shop (affiliate links):
Bandsaw - amzn.to/2gMHrjd
Bevel gauge (t-bevel) - amzn.to/2eYLB2N
Bluetooth adapter - amzn.to/1GDYgFl
Dado blade - amzn.to/210w6ex
Dewalt planer - amzn.to/1IGqVoz
Dewalt sander - amzn.to/1IGt0B6
Dewalt countersink - amzn.to/1ThxZQi
Dewalt trim router - amzn.to/2istJn9
Dovetail gauge - amzn.to/2bJpxIi
Eclipse quick release vise - amzn.to/1PUkyEW
Engineer square - amzn.to/2bqS0lA
Festool Domino - amzn.to/1IGrQ8u
Forstner bit - amzn.to/2fMph1z
Glu-Bot glue bottle - amzn.to/1LrKulZ
Gyokucho 372 japanese pull saw - amzn.to/1TgnE9i
Irwin Marples 10" blade - amzn.to/1klkIIr
Kreg K4 - amzn.to/1V4LTGM
Kreg DB210 pocket hole machine - amzn.to/1pFvmwU
Kreg Mini - amzn.to/1phH3cQ
Marble router bit or drill bit - bit.ly/1HIAZCA
Megapro NAS Driver - amzn.to/1OH8H8v
Milwaukee plunge router - amzn.to/2gSr5Ci
Mp3 earmuffs - amzn.to/1RF5CZq
Narex marking knife - amzn.to/2ciT7K2
Ridgid miter saw - amzn.to/2h0Xf2s
Router Lift Router - amzn.to/2zVUV2L
Rustic pine Briwax - amzn.to/1EnC0Jg
Ryobi 18v brad nailer - amzn.to/1Q3zZdG
SawStop titanium series blade - amzn.to/1OQUXbr
Scraper BAHCO - amzn.to/1PTR4Ie
12" speed square - amzn.to/1QY7BKg
Spiral router bits - amzn.to/2BnOINX
T-bevel (bevel gauge) - amzn.to/2eYLB2N
Table top hold down clips - amzn.to/2oP1wtw
Tudor brown briwax - amzn.to/1TnDPxC
Wax brush wheel for drill - amzn.to/1PtRYLi
Wood glue - amzn.to/1lZOwfc
Woodriver #4-1/2 - amzn.to/24pY95R
Woodriver #62 - amzn.to/22aF3F0
PO Box 33
Mathiston, MS 39752
Want to help support what I do? Here's what you can do:
Buy a Plan: goo.gl/L7wNIF
5. THE CHEAPEST WAY to get a BEAUTIFUL Barn Ceiling! ALL ABOUT TONGUE & GROOVE - Cost & Strategies
Logan shows us why and how to install tongue and groove pine roof decking on a timber frame wedding barn.
Timber framed building use large timbers and big spans to create a simple and beautiful aesthetic to barn building. Logan explains how much tongue and groove decking costs and the strategies for installing it efficiently.
Getting tongue and groove boards tight is very important and planning the roof rafter layout will help installation go smoothly.
Here are the screws we used for this installation: amzn.to/3hgwmF2
As an Amazon affiliate, we make a small commission on anything you purchase after following the link above, at no additional cost to you!
#timberframe #woodceiling #barn
6. Making Tongue & Groove Joints
This video is from the full story on NewWoodworker.com in our ever-growing Basics section. This is a very popular joint because it is relatively strong yet can be made on a table saw or router table without special tools! See the lin below for the full story.
7. How to Make Tongue & Groove Cabinet Doors with a Table Saw
Build sturdy cabinet doors in many styles using only a table saw and a dado blade.
Subscribe to this channel for new weekly video woodworking lessons, tips and tricks:
Get more FREE project plans, expert tips and tool updates in our weekly email newsletter. Subscribe here:
Visit our website for the best woodworking projects and lessons:
8. I don't understand why people make this so hard
📽️ WHAT TO WATCH NEXT
Tools & Tips for Making Cabinets - youtu.be/Vey9ZclCFMI
How to Build Cabinets - youtu.be/7KkvrgMk8Us
Organize Any Workspace - youtu.be/sSaKwxtrNmk
✅️ GET PROJECT PLANS:
Base Cabinets: mwawoodworks.com/product/base-cabinet-plans/
Upper Cabinets - mwawoodworks.com/product/upper-cabinet-plans/
Cabinet Plan Bundle (Save 33%) - mwawoodworks.com/product/the-cabinet-bundle-save-20/
The Whole Enchilada Plan Bundle (Save 65%) - mwawoodworks.com/product/the-whole-enchilada-plan-bundle/
✅️ TOOLS AND SUPPLIES IN THIS VIDEO:
Flat Grind Saw Blade (ripping) - amzn.to/2zYPEZQ
35mm Forstner Bit - amzn.to/30WQO3S
Center Punch - amzn.to/2PKnfRF
Wood Glue - amzn.to/2PMh6Vh
Parallel Clamps - amzn.to/30ZNRPZ
Oil/Wax Finish - amzn.to/30YbIzn
Lacquer Finish (more durable) - amzn.to/2ZyFcax
Cordless Drill - amzn.to/2PZVxjY
Tape Measure - amzn.to/34tHl6j
Double Square - amzn.to/2UCOFYD
Square - amzn.to/2LAqoP0
Mallet - amzn.to/2ZXzbja
✅️ LIST OF THE TOOLS I USE IN MY SHOP : bit.ly/tools-i-use
*Disclaimer – As an Amazon Associate I earn from qualifying purchases
✅️ HOW TO SUPPORT MY CHANNEL
Get Project Plans: bit.ly/download-project-plans
Visit My Website: mwawoodworks.com
SUBSCRIBE : youtube.com/mwawoodworks?sub_confirmation=1
✅️ MWA WOODWORKS ON SOCIAL
How to Make Shaker Style Doors |Woodworking Project | DIY Cabinetry
9. Adjustable Tongue & Groove Bit, Freud 99 036 - Unboxing
Unboxing the Tongue & Groove Router Bits from Freud.
It seems to be a very solid peace. I am very excited to try it out.
The Bits are adjustable, so they allow to create tongues and grooves of different sizes. very cool.
10. Making Tongue and Grooves | The Toolbox Project #7
In this video, I'm going to show you how to cut the tongue and groove base that will make up the bottom of the toolbox. I actually made an error with this stage so be sure to watch all the way through to the end to see how you can avoid doing the same!
As always, if you need more information on this stage or would like to know how to do this by hand, take a look at the supporting resources below.
If you'd like to know more about this series and the Free Online Woodworking School in general. Go and have a look at the full lesson here:
SUPPORTING MATERIAL FOR THE LESSON
Cutting Grooves by Hand
Cutting Rebates by Hand
My Router Table (Highly Recommended)
► Review: youtube.com/watch?v=nQsLqsSi2-U
► Review: youtube.com/watch?v=V2TjWbuGnLs
SUPPORTING MATERIAL FOR THE PROJECT
See all the FREE lessons for this project here:
Learn more about the Free Online Woodworking School:
Pre-Planed Project Packs:
(Perfect for those who don't have access to machinery!)
SUPPORT THE FREE ONLINE WOODWORKING SCHOOL
With your help we can help keep this channel running and keep the content free. Your donations will help fund new tools, equipment and cover our overheads to keep producing more high quality content in the future.
► Instagram: instagram.com/mattestleafurniture
► Facebook: facebook.com/mattestleafurniture
► Twitter: twitter.com/mattestlea
► Patreon: patreon.com/mattestlea
► Pinterest: pinterest.com/estleafurniture
► LinkedIn: linkedin.com/in/matt-estl...
See what tools we use on the Free Online Woodworking School here:
WHAT IS THE FREE ONLINE WOODWORKING SCHOOL?
When designing the online course, Matt wanted to make it as close as possible to his own experience learning at Rycotewood Furniture Centre in Oxford. Primarily, by providing a structured course that anyone can follow, without having to find their own way through an arbitrary list of videos on YouTube.
11. Routering Tongue and groove Herringbone wood design for Jack and Jill bathroom ceiling renovation
The boards we used were from a wall we took down from the living room to Moms old bedroom which gave a better flow throughout.. We a repurposing old 1932 wall boards by routering and in the next Video we will be Planing the repurposed boards.. I hope you like and Subscribe and don't forget to hit the Bell so you can get all the newest Videos........
12. Shed advice | Tongue & Groove | Pineca.com
In this vlog we talk about the advantages of T&G logs and why you should choose T&G over other timber structures.
Contact us at:
13. BillyOh Gardener's Retreat Tongue & Groove Single and Double Door Apex
14. Tongue and Groove Clamp | Logosol SH410 | LOGOSOL
With the optional attachment for making T&G profiles you further increase the range of uses of this planer.
Read more at: logosol.com
15. How To Install Tongue and Groove Flooring | Ask This Old House
In this video, Ask This Old House mason Mark McCullough teaches Kevin O’Connor how to patch holes in a tough surface.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse.
Tom Silva shows Kevin O’Connor how to install tongue-and-groove hardwood flooring. Tom shows Kevin a prefinished flooring product that he chose and explains how the tongues and grooves line up for a proper installation. Tom explains that it’s important that the first row be as straight as possible and shows Kevin how to make that happen using a chalk line for reference.
Cost: Around $5 to $6 per square foot
Time: A weekend
Hardwood tongue-and-groove flooring [ thd.co/3G3697V]
Construction adhesive [ amzn.to/3G4Xf9X]
Finish nails [ thd.co/2Z9X6Rm]
Flooring staples [ thd.co/3ptntge]
Shims [ thd.co/2Z418eb] or spacers [ thd.co/3b0gdQw]
Wood putty [ amzn.to/3jk2GZ0]
Chalk line [ amzn.to/3BZmaJu]
Pencil [ amzn.to/3vupDgM]
Tape measure [ amzn.to/3neZ6jI]
Caulking gun [ amzn.to/3piP4AL]
Miter saw [ amzn.to/3jmOJJL]
Finish nailer [ amzn.to/3ppdDfs]
Flooring nailer [ amzn.to/3G37E63]
Rubber mallet [ amzn.to/3vuPghn]
Flooring jack [ amzn.to/3phVwYU]
Steps for installing tongue and groove flooring
1. Mark the first row by placing the groove side of a board against the wall near a corner, leaving a gap of approximately 3/16 of an inch between the board and wall. Mark the subfloor on the tongue side and measure the distance between the mark and the wall. Transfer this mark to the other side of the room and snap a chalk line between these points.
2. Run a bead of construction adhesive between the chalk line and the wall. This is only necessary for the first row.
3. Lay a piece of flooring on the floor so the outside of the tongue lines up with the chalk line. Use a finish nailer to nail through the face of the board along the groove side of the board.
4. Place shims or spacers in the gap between the flooring and the walls to hold it firmly in place.
5. Holding the finish nailer at an angle, shoot nails through the tongue every 8 to 10 inches.
6. Install the next piece of flooring against the chalk line, aligning the tongue and groove between the two pieces. Use a rubber mallet to join the two pieces before nailing through the face and tongue of the board. Continue across the wall until you get to a corner.
7. Mark the end piece for cutting by keeping the tongue pointed toward the wall while also flipping it upside down. Maintaining a rough 3/16-inch gap at the wall, use a pencil to make a mark where it meets the previous board. Cut the board to length with a miter saw. Nail through the face and tongue to hold it in place.
8. Continue using this method until you’re far enough from the wall to use the flooring nailer. At that point, simply lay a new board and tap it into place with the rubber mallet before nailing through the tongue with the flooring nailer.
9. Continue laying the boards, tapping them in place, and nailing every 8 to 10 inches. Ensure that the seams where the boards meet between corresponding courses are at least 6 inches from each other.
10. Once you make it across the room, it won’t be possible to use the rubber mallet to jockey the board into position. Use a flooring jack pressed against the wall to position the boards properly.
11. Along the wall on the other side of the room, switch back to the finish nailer and nail through the face of the boards every 8 to 10 inches.
12. Fill the nail holes with wood putty, buff the surface, and install baseboard moldings.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: thisoldhouse.com/pages/streaming-app
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.
Follow This Old House and Ask This Old House:
How To Install Tongue and Groove Flooring | Ask This Old House